What you’ll be creating
In this tutorial we will create an emotional scene of a girl in an emotional underwater dreamscape. We will use some essential techniques for doing photo manipulation. We will use masking, brush tool, some filter, color adjustments, and textures all through the steps in this tutorial. Use Adobe Photoshop CC to fully follow this tutorial. Some filters used in this tutorial will not be available in Photoshop CS. Don’t forget a glass of coffee and optionally a pack of cigarettes for your companion. Ready..?
- Girl – lockstock
- Underwater – koko stock
- Cathedral – kippa2001 (Alternative)
Let’s start by creating a document by opening the underwater image in photoshop (Ctrl+O). This image will be the background layer in the document on which we will create the scene.
We need to alter the direction of the image by positioning the light rays on the left side. To do this, hit Ctrl+T to activate the free transform tool. Right-click on the image to show the free transform option box. Choose flip horizontal.
Finally, go to image > image size. Alter its size to 1800 pixels wide and 1200 pixels high.
Add the cathedral image into the document by hold-clicking and dragging the image from the folder in our PC where we have saved it to the open document in photoshop.
Change this cathedral layer to overlay blending mode. Scale its size to the size needed and move it to the position where the ceiling is on the light rays.
Finally, set the opacity of this layer to about 20%.
We need to hide some parts of the cathedral image. We will give this layer a layer mask. Go to layer > layer mask > reveal all to give it a layer mask. Take brush tool (B) and choose a very soft round brush (0% hardness) set to about 15-20% opacity. With black color, stroke the brush on areas around the window, lower parts and left side of the building, and the ceiling a bit as well to mask them. The red highlighted parts are areas covered with a mask.
Here is the result after being masked:
Now we will alter the color of the underwater by giving it a bit blue tone. Create a new layer above the cathedral layer (Shift+Ctrl+N). Name this new layer, say, gradient. Set the foreground layer to #abd9f1 and background color to #3d87cb. Activate gradient tool (G) and choose foreground to background linear gradient. On this new layer, hold-click and drag the tool from the middle top point downwards to the bottom to create a gradient.
Set this gradient layer to soft light blending at 75% opacity.
Next we will add water texture to the scene. Create a new layer above the gradient layer. Name this layer, say, texture. Set the foreground color to blue #155ea5 and background color to #a0d2ec. Go to filter > render > cloud to fill this layer with a cloud pattern.
Go again to filter > other > minimum to give this layer minimum filter.
Set this layer to soft light blending at low opacity 0f 20%.
Proceed to add a model to the scene. Open the model image. Take the pen tool (P). With the tool, cut out the model from the image.
Add the cut out to the main scene. Scale its size to the size as much as it is proper. Position the model in the middle of the scene under the light rays.
In the next several steps we will create hair to the model. Firstly, take the pen tool (P) and create paths. The paths given in the screenshot is just an example, so we might not exactly create the same paths as the example below.
After creating paths, be active in path panel (window > path). Open the path menu, and choose Save Path.
Now we have path saved as path 1. We need to save this path to re-use it in the next steps.
Create a new layer (Shift+Ctrl+N) above the model layer on which we will paint the hair. Name this layer, say, hair 1. Make sure to set the brush tool (B) to round brush with a size of about 7 pixels at 0% hardness and 100% opacity. Set the shape dynamics of the brush to Pen Pressure control in the Brush panel (F5). Set the foreground color to #1e1210. Now open the path menu and choose Stroke Path. Use the brush tool to stroke the paths and checkmark Simulate Pressure.
Duplicate the hair 1 layer. Move the duplicate to the lower position at the model’s back. Take the Free Transform tool (Ctrl+T) and warp the duplicate layer to alter its shape.
Select the original hair 1 layer and give it a layer mask (layer > Layer mask > reveal all). Mask some hair in red highlight.
Mask the duplicate layer as well to hide the hair on the left arm.
Create another new layer (Shift+Ctrl+N) between the original hair1 and the duplicate layer. Name this layer, say, hair 2. Using given paths, paint highlight of the hair by stroking the paths. Use the color of #8e2c10.
Set this layer to normal at about 8-10% opacity. This will give a reddish brown highlights to the hair.
Now create again a new layer above all the other hair layers. Name this layer, say, hair 3. With a smaller brush with a size of 3-4 pixels and color #662f16, stroke the path to paint more highlights.
Given this amount of color, set this layer to normal at 5-7% opacity. This will give more highlights to the hair.
Finally, create another new layer above the hair 3 layer. On this layer, stroke the same paths with a smaller brush of 1 pixels with lighter brown color.
Given this amount of color, set this layer to normal at about 15% opacity.
In a similar way, create more hair strands to the model.
Here is the result so far. Select the model and all the hair layers. Hit Ctrl+E to merge them into a single layer. Name this new layer, say, model.
Proceed to give this model some retouching on the skin and dress. Go to filter > camera raw. Prior to giving it the filter, convert this layer into a smart object by going to layer > smart objects > convert to smart object. Use the value below:
Given this values, the result should be like this:
Hide the effect of this filter on areas around the hair by masking the filter.
Now we will do some color adjustment to the model to make it be well blended with the whole scene. Firstly, we give it a new fill layer with a clipping mask. Go to layer > new fill layer > solid color. Use the color of #01848c.
Set this solid color layer to soft light at 100% opacity.
Mask this layer on areas around the hair. Use a very soft round brush (B) set to about 20% opacity with 0% hardness.
Give another color fill layer with a clipping mask. Use color of #0d6b6a. set this layer to soft light at about 40% opacity.
Next, create a new layer with a clipping mask above the two-color fill layers. Name this layer, say, texture 2. Give this layer cloud filter (filter > render > cloud). Use the color as given in the screenshot.
Give this cloud layer another filter: minimum (filter > others > minimum)
Mask some part of this layer on areas in red highlight.
Now duplicate the underwater layer. We will use this duplicate as the texture for the model. Move the duplicate layer above the texture 2 layer. Give this layer a clipping mask (Ctrl+Alt+G).
Set this duplicate layer to normal at about 45% opacity. Mask this layer on areas around the face and shoulder as indicated in red highlight.
Create another new layer above all the other layers (Shift+Ctrl+N). Name this layer, say, highlight. We will add some highlights to the model. Set this layer to overlay filled with neutral color, 50% grey (#808080).
Take a very soft round brush tool (B) and with white color paint highlight on areas around the face, arms, and dress. Here is the layer set in normal blending.
Here is the result in overlay blending at 100% opacity.
We can duplicate this layer to define stronger highlight.
Now select the model later. Go to layer > layer mask > reveal all to give this layer a layer mask. Mask areas on the model’s dress and hair and other parts around where needed.
Next we will add some highlight on the building. Create a new layer again above all the other layers. Name this layer, say, highlight 2. Set this layer to soft light. Paint the highlight on areas around the building. This is the layer will look in normal blending at 100% opacity.
And given this amount of color, the result should be like this:
Finally, we will set the overall color adjustment to the scene. Create a new fill layer above all the other layer (Layer > new fill layer > solid color). Use color of #0d6b6a. set this color fill layer to soft light at about 60% opacity. Mask this layer on areas around the light rays as indicated in red highlight.
Give another new fill layer. Use the color of #070816.
Set this layer to exclusion blending at 100% opacity.
Now go to layer > new adjustment layers > brightness/contrasts to give the whole scene brightness/contrasts layer.
Mask this adjustment layer on areas highlighted in red.
Give another adjustment layer: selective color. Set this layer to normal blending at about 70% opacity.
Finally, give the scene a new adjustment layer again: gradient map.
Set this gradient layer to normal at about 35% opacity. Mask area around the middle of the scene as shown in the red highlight.
We are almost done! We will add some bubbles around the model as an indication of the model’s movement in the water. We will create a bubble custom brush first. Create a new document (Ctrl+N) with a size of about 500 pixels high and 500 pixels wide. Take the ellipse tool (U) and create a black spherical shape. Don’t forget to hide the background layer by clicking the eye icon next to this layer.
Mask the shape as indicated in red highlight. Right-click on the shape layer in the layer panel to show the layer option and choose Rasterize Layer.
Finally go to edit > define brush preset. Name this brush, say, bubble.
Next, we will add some bubbles to the scene. Create another new layer below the brightness/contrast layer in the main document (step 21). Load the bubble brush previously created. Open the brush preset (F5) and set the brush stroke.
On this new layer, paint the bubble using the color of #76b2be. Try to vary the brush size to create various sizes of bubbles.
And finally, select the topmost layer and hit Shift+Ctrl+Alt+E to merge all the visible layers into a single layer. Name this layer, say, final. Go to filter > sharpen > unsharp mask to sharpen the final result a bit.
Download the PSD Underwater.zip | 53.1 MB
Tutorial by Dek Wid
Thank you for following this tutorial. I hope you find it useful and happy photoshopping.
– Dek Wid
Powered by Creative Market
Powered by Creative Market